Get the service you deserve!
✓ Guaranteed hassle-free shopping experience. Simply select the color and the epoxy quantity you want. We automatically calculate the required amount of colorant to dye the clear epoxy.
✓ No surprises. You always get the color you see online. We present all our colors in 4K videos and high-resolution pictures so you can see exactly what you are getting.
✓ Professional easy to follow step-by-step tutorials.
✓ Money-Back Guarantee
✓ Same Day Shipping
✓ Delivery across USA
✓ Friendly 24h-Support
Get the products you’ve always dreamed of!
✓ The biggest color selection on the market.
✓ The best epoxy properties across the USA:
- Bubble Free
- Solvent Free
- BPA Free
- Easy to Use
Instructions for Primer
- We recommend a working temperature of approx. 60°F.
- The floor should be dust-free, clean, and even. Level out holes, unevenness, and slopes in advance with levelling compound.
- Always start with our EPOXY PRIMER.
- Dye the EPOXY PRIMER with our WB pigment paste ANTHRACITE GRAY and mix well.
- Pour the material into a paint tray after mixing.
- Roll the material onto the desired surface with a paint roller.
- Allow the primer to dry (approx. 8-12 hours).
- Spray the desired marbling on the primed surface with the Marble Effect Spray and allow it to dry.
Instructions for Main Coat
- Mix the resin (A) with the hardener (B) in a ratio of 2:1 (e.g., 2gal resin + 1gal hardener).
- Ideally, transfer the material to a clean mixing bucket and stir again. This will ensure that the resin (A) and hardener (B) are completely mixed together.
- Pour the material onto the floor immediately after mixing, as the product can boil up in the mixing bucket.
- The main coating is cured after 16-24h.
Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 60°F) and increased humidity, the time until the epoxy resin is fully cured may be extended.
Total Thickness for Floors and Other Surfaces: 1/16”
- Priming with EPOXY PRIMER: approx. 0.65oz/sqft
- Main Layer: approx. 4oz/sqft
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colors may not be uniformly displayed.