Microcement Set for Walls

✓ Guaranteed hassle-free shopping experience. Simply select the color and the square footage you want to cover. We automatically calculate the required amount of microcement and dye for you.
✓ No surprises. You always get the color you see online. We present all our colors in 4K videos and high-resolution pictures so you can see exactly what you are getting.
✓ Professional easy to follow step-by-step tutorials.
✓ Same Day Shipping
✓ Delivery across USA
✓ Friendly 24h-Support 

Primer

1. The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
2. Sand off any unevenness.
3. If required use our Putty Primer to level and prime your walls, for example on tiles.
4. If your walls are already leveled and smooth, use either our 2K Bonding Primer (for-non absorbent surfaces) or DEEP PRIMER (for absorbent surfaces) to prime your walls.

Main Coating

1. Mix microcement A components in medium grain size with the Liquid B component in a ratio of 100:20 by weight (i.e 15.4lbs Powder A-component with 3lbs Liquid B-component).
2. Add 2% WB pigment to color the material (i.e. 2x3.5oz WB Pigment to 15.4lbs Powder A-component and 3lbs Liquid B-component).
3. Spread the material thinly with a trowel and allow to dry.
4. Sand off any unevenness in the surface greater than 1/8" and vacuum up any sanding dust.
5. Apply a second coat in the same way within 24 hours.

Pro Tip: Up to 10% WB Pigment can be added for more intense colors. If you exceed 24 hours between the microcement layers, sand the first layer and remove the dust. This roughens the surface for better bonding and ensures the next layer won't break off. For stubborn fine particles, use a light brush of liquid B. Brush or roll on a small amount to avoid flooding the surface. 

Sealant Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX matte polyurethane resin (PU resin).

1. Ensure the substrate is stable, clean, dry, and free from any substances that may prevent proper adhesion. We recommend sanding to increase adhesion.
2. Mix the resin A-component and the hardener B-component in a 2 to 1 mixing ratio (e.g. 28fl.oz. resin A-component with 14fl.oz. hardener B-component).
3. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
4. Pour the mixture into a paint tray and apply it thinly with a roller in a criss-cross pattern.
5. Let the first coat cure and apply the second coat in the same way. We recommend applying the second coat after min. 6h but not more than 20h.

Pro Tip: To ensure that your PU is applied everywhere, apply the quantity received in 2 coats. By applying 2 coats in a criss-cross motion, the chance of an unsealed gap is greatly reduced. 

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support. 

Note: Please note that due to different lighting conditions and monitors, the colors may not be uniformly displayed.