Microcement Set for Bathrooms, Showers, and Wet Areas incl. PU Matte Sealant
Microcement in premium quality for bathrooms and wet areas of all kinds for indoor and outdoor use
- Characteristics: High load-bearing capacity, weatherproof, UV-resistant
- Curing time per layer at 70°F: Microcement approx. 8h, PU Topcoat approx. 12h
- Scope of delivery for 37sqft wall: 15.4lbs medium-grained powder + 4.4lbs liquid acrylic resin + WB Pigment + 42fl.oz. PU resin and hardener
- Scope of delivery for 48sqft floor: 15.4lbs large-grained powder + 15.4lbs medium-grained powder + 8.8lbs liquid acrylic resin + WB Pigment + 42fl.oz PU resin and hardener
1. Select colour












2. Select application area
3. Select quantity

Microcement Seemless Design
EPODEX Microcement is a special easy-to-apply leveling compound. It can be applied onto floors, walls, stairs, table, and more! Acchieve a unique, comtemporary interior decor in no time. From exposed concrete wth natural cavities to multi-colored designs with 3D effect - Everything is possible!
Universally Applicable
Our microcement is suitable for indoor and outdoor use and can be applied to almost all substrates such as parquet, tiles, natural stone, plasterboard, metal, ceramic, marble, OSB and more. The material is highly resilient and UV-resistant. At the same time, it remains flexible and breathable.


Completely Waterproof
EPODEX microcement in combination with our polyurethane resin (PU) sealant is waterproof and weather resistant. It is therefore ideal for showers and outdoor areas. The sealing layer is finally rolled onto the hardened microcement.
Get the service you deserve!
✓ Guaranteed hassle-free shopping experience. Simply select the color and the square footage you want to cover. We automatically calculate the required amount of microcement and dye for you.
✓ No surprises. You always get the color you see online. We present all our colors in 4K videos and high-resolution pictures so you can see exactly what you are getting.
✓ Professional easy to follow step-by-step tutorials.
✓ Same Day Shipping
✓ Delivery across USA
✓ Friendly 24h-Support
Instructions for Use
Primer
- The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
- Sand off any unevenness.
- If required use our Putty Primer on your walls and 2K Leveling Compound on your floor to level and prime, for example on tiles.
- If your area to be coated is already leveled and smooth, use either our 2K Bonding Primer (for-non absorbent surfaces) or DEEP PRIMER (for absorbent surfaces) to prime your furniture.
Main Coating
- Mix microcement A components with the Liquid B component in the mixing ratio specified on the label.
- Add 2% WB pigment to color the material (i.e. 2x3.5oz WB Pigment to 1 bag microcement powder and its liquid B-component).
- Spread the material thinly with a trowel and allow to dry.
- Sand off any unevenness in the surface greater than 1/8" and vacuum up any sanding dust.
- Apply a second coat in the same way within 24 hours.
Application of microcement on walls: Layer 1 (medium grain size): 0.24lb/sqft, Layer 2 (medium grain size): 0.24lb/sqft Application of microcement on a floor: Layer 1 (large grain size): 0.32lb/sqft, layer 2 (medium grain size): 0.24lb/sqft
Pro Tip: Up to 10% WB Pigment can be added for more intense colors. If you exceed 24 hours between the microcement layers, sand the first layer and remove the dust. This roughens the surface for better bonding and ensures the next layer won't break off. For stubborn fine particles, use a light brush of liquid B. Brush or roll on a small amount to avoid flooding the surface.
Sealant
Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX matte polyurethane resin (PU resin).
- Ensure the substrate is stable, clean, dry, and free from any substances that may prevent proper adhesion. We recommend sanding to increase adhesion.
- Mix the resin A-component and the hardener B-component in a 2 to 1 mixing ratio (e.g. 28fl.oz. resin A-component with 14fl.oz. hardener B-component).
- Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- Pour the mixture into a paint tray and apply it thinly with a roller in a criss-cross pattern.
- Let the first coat cure and apply the second coat in the same way. We recommend applying the second coat after min. 6h but not more than 20h.
Pro Tip: To ensure that your PU is applied everywhere, apply the quantity received in 2 coats. By applying 2 coats in a criss-cross motion, the chance of an unsealed gap is greatly reduced.
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colors may not be uniformly displayed.
Warning Danger
Warning Danger Causes serious eye damage. Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Harmful if inhaled. Contains isocyanates. The information on the product label must always be followed.