Metallic Floor Paint | Premium Floor Effect Paint

✓ Guaranteed hassle-free shopping experience. 
✓ No surprises. You always get the color you see online. We present all our colors in 4K videos and high-resolution pictures so you can see exactly what you are getting.
✓ Professional easy to follow step-by-step tutorials.
✓ Money-Back Guarantee
✓ Same Day Shipping
✓ Delivery across USA
✓ Friendly 24h-Support

Priming with PRIMER

1. We recommend a working temperature of approx. 70°F.
2. The surface should be dust-free, clean, and even. Level out holes, unevenness, and slopes in advance with leveling compound.
3. Always start with our PRIMER.
4. Mix the primer thoroughly and dye it with the supplied WB Pigment.
5. Pour the colored primer into a paint tray after mixing.
6. Apply the colored primer on the desired surface with a paint roller.
7. Allow the colored primer to dry (approx. 8-12 hours).

Main Coating with EFFECT PAINT

1. Use our EFFECT PAINT for the maint coat.
2. First, mix half the supplied EFFECT PAINT with the supplied metallic pigment PLATINUM SILVER.
3. Then, mix the other half of the supplied EFFECT PAINT with the supplied metallic pigment PEARL WHITE.
4. Paint the PLATINUM SILVER EFFECT PAINT in a criss-cross pattern onto the primed surface with a paint roller. The primer should remain a bit visible to achieve the desired effect.
5. Paint the PEARL WHITE EFFECT PAINT wet on wet on the PLATINUM SILVER EFFECT PAINT with a paint roller.
6. The paint is dust-dry after approx. 5 hours.

Sealing with PU

1. Coat the surface with the PU resin.
2. To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU matte: 2:1 (e.g.: 28fl.oz. A + 14fl.oz B).
3. Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
4. Apply the material thinly with a foam roller in a criss-cross pattern.
5. Let the first coat cure and apply the second coat in the same way. We recommend applying the second coat after min. 12h but not more than 20h.

Pro Tip: Do not wear rubber-soled shoes while before or during the application of the 2K PU Topcoat, as rubber microparticles may cause an uneven finish. Rubber-soled shoes can be worn once the second coat of 2K PU Topcoat is cured.

Recommended thicknesses when coating floors and other surfaces

• Overall coating (primer + main coating + sealing): approx. 1-1.25oz/sqft
• Primer: approx. 0.4-0.5oz/sqft
• Main layer: approx. 0.35-0.45oz/sqft
• Sealing: approx. 0.26fl.oz./sqft per coat. We recommend approximately two coats.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.